Figured Amarillo Wood Veneer 7" x 72' with no Backing raw 1/42" Thickness

Figured Amarillo wood veneer 7" x 72" with no backing. Visit My Store: JSO Wood Products Raw wood veneer is fragile and tends to have cracks. Most of them can be worked around or mended. We have tried to show these cracks with blue tape. We may have missed some and some further cracking could occur in (though unlikely). There also may be writing of some sort near the end of the veneer, but it can be sanded off or the other side should be usable. About pictures : Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness : (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply : Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish : most any conventional finishing products can be used with veneer that is applied correctly. Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satis

• Brand: Amarillo figured wood veneer raw flexible roll Q/C
• Model: Quarter Cut grain sheet quartered 1/42" thickness
• Mpn: 1/42"